FREE SHIPPING TO THE LOWER 48 STATES ON ORDERS OVER $50.00

*excludes Alaska, Hawaii & Puerto Rico

JK Gen 2 2007-08 Transmission top LS Bellhousing Adapter Plate Kit

$769.99
In stock
SKU
551001-GEN2A
- +

LS Engine to Nissan Gen 2 JK Transmission Bellhousing Adapter Plate - Clutch Disc Kit

 

Fits: GM LS Series Engines, Gen 2 JK Transmission

  • Allows the ability to install the Nissan JK Transmission onto a GM LS engine with minimal modification
  • Uses all standard F-Body LS T56 Flywheel - Pressure Plate - Bellhousing components
  • Compatible with Nissan 350Z/G35 6-speed Transmissions from 2007 to 2008 
  • Allows transmission and clutch servicing without removing engine in most applications
  • Package includes: Bellhousing Adapter Plate, Pilot Bushing, Clutch Disk, Alignment Tool and Mounting Hardware
  • Made from aerospace-grade billet aluminum
  • Made in the USA
  • NOT compatible with Generation 1 CD009 Transmissions from 2003-2006 350Z/G35 applications - See 551001-GEN1 Adapter Kit
  • To verify Transmission Generation, Measure input shaft bearing OUTSIDE DIAMETER 
    • Generation 1 = 3.937 or 100mm  &  Generation 2B = 3.543 or 90mm
  • Modification to transmission entails cutting/removing OEM Bellhousing and OEM front bearing cover from transmission to allow adapter plate installation
  • Adapter plate will take place of front bearing cover on transmission
  • Standard T56 Bellhousing will bolt to adapter plate
  • Installer must verify bellhousing/adapter plate alignment is within .005" during insatllation to prevent bearing side-loading  -  OFFSET DOWELS MAY BE NECESSARY TO ENSURE PROPER ALIGNMENT
  • DOES NOT FIT WITH EXTENDED CRANKSHAFTS

More Information

Bullet Point 1 Connect your CD009 Transmission onto an LS engine with minimal modification
Bullet Point 2 Uses all standard F-Body LS T56 Clutch/Bellhousing components
Bullet Point 3 Compatible with Gen 2 JK Transmissions 2007 to mid 2008
Bullet Point 4 Package includes: Bellhousing Adapter Plate, Pilot Bushing, Clutch Disk, and Mounting Hardware
Bullet Point 5 Made in Wichita, Kansas from aerospace grade, USA produced, billet aluminum
Manufacturer Part Number 551001-GEN2A
UPC 840117205284
Weight 20.000000
ICT Manufacturer ICT Billet
United States United States
Length Inches 15
Width Inches 15
Height Inches 3
Download .PDF for Vehicle No

WARNING - This product can expose you to chemicals including lead, which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.P65Warnings.ca.gov

ALUMINUM: Most of the aluminum alloys used today contain some level of lead, usually less than .1%. Lead is known to the state of California to cause cancer and reproductive harm. Most aluminum alloys are physiologically inert in their solid form, and the lead is contained within, however user-generated dust and/or fumes may pose a hazard if inhaled or ingested. Heating beyond a certain temperature may also provide avenues for exposure.

STEEL (steel bolts):  Steel is an iron alloy with several metals including Nickel and Chromium. Both Nickel and Chromium are known to the State of California to cause cancer and reproductive harm, respectfully. This warning applies to stainless steels as well.