*excludes Alaska, Hawaii & Puerto Rico

LS Truck OEM Fox Body Power Steering Alternator Bracket Kit Mustang LS Swap

In stock
- +

LS to Fox Body Power Steering Alternator Bracket Kit

This kit is designed specifically for an LS swapped Fox Body Mustang (1979-1993) (Third Generation)

  • This kit uses the Truck/SUV (or LS3/L99 Camaro) Crank Pulley
  • Includes: bracket, idler pulleys, and mounting hardware
  • Compatible with a 1990-2004 Ford Mustang factory power steering pump and pulley. (F1ZZ3A674BBRM & D9ZC3D673A3A)
  • **Alternator: Suggested Part #: ICT# ALT300. (Will not fit Corvette/CTS-V Alternators or 2010-15 Camaro large bolt-pattern, or high amp alternators. Will only work with 105 amp alternators
  • If needing to extend your alternator harness connection, use ICT# WEALT30-36 (4-pin) or WEALT40-36 (2-pin)
  • Made in Wichita, Kansas from aerospace grade, USA produced, billet aluminum


**This can only be used on blocks with at least 2 mounting holes on the front of the block. Blocks that only have 1 mounting hole will require drill template 551445 to add the 2nd M10-1.5mm hole.   This is in a non-critical part of the block, away from the cylinder, oil, and water jackets.  

More Information

Bullet Point 1 Compatible with a 1982-1993 Mustang Factory A/C Compressor
Bullet Point 2 Made in Wichita, Kansas From Aerospace Grade, USA Produced, Billet Aluminum
Bullet Point 3 Includes Bracket Idler Pulleys Tensioner and Mounting Hardware
Bullet Point 4 Compatible With Truck SUV or LS3 L99 Camaro Crank Pulley
Bullet Point 5 Compatible with 1990-2004 Mustang factory power steering pump and pulley
Manufacturer Part Number 551791-3
UPC 657814753730
Weight 5.964000
ICT Manufacturer ICT Billet
United States United States
Length Inches 13
Width Inches 11
Height Inches 2.5
Download .PDF for Vehicle No

WARNING - This product can expose you to chemicals including lead, which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information go to


ALUMINUM: Most of the aluminum alloys used today contain some level of lead, usually less than .1%. Lead is known to the state of California to cause cancer and reproductive harm. Most aluminum alloys are physiologically inert in their solid form, and the lead is contained within, however user-generated dust and/or fumes may pose a hazard if inhaled or ingested. Heating beyond a certain temperature may also provide avenues for exposure.


STEEL (steel bolts):  Steel is an iron alloy with several metals including Nickel and Chromium. Both Nickel and Chromium are known to the State of California to cause cancer and reproductive harm, respectfully. This warning applies to stainless steels as well.