LS Truck Low Mount Alternator Power Steering Pump Bracket LSX LS3 LQ4 LQ9 Billet

$129.99
Out of stock
SKU
551669-3
LS Truck Alternator Bracket Low Mount and Power Steering Pump Bracket LSX LS3 LQ4 LQ9 L33 LS3 Billet

Browse more LS swap brackets.

WARNING - This product can expose you to chemicals including lead, which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.P65Warnings.ca.gov

 

ALUMINUM: Most of the aluminum alloys used today contain some level of lead, usually less than .1%. Lead is known to the state of California to cause cancer and reproductive harm. Most aluminum alloys are physiologically inert in their solid form, and the lead is contained within, however user-generated dust and/or fumes may pose a hazard if inhaled or ingested. Heating beyond a certain temperature may also provide avenues for exposure.

 

STEEL (steel bolts):  Steel is an iron alloy with several metals including Nickel and Chromium. Both Nickel and Chromium are known to the State of California to cause cancer and reproductive harm, respectfully. This warning applies to stainless steels as well.

Truck Alternator and Power Steering Pump Bracket Kit

 
     
  • Compatible with:  truck/SUV (or LS3/L99 Camaro) crank pulley (ICT# BAL300)
  • Compatible with:  1998-02 LS1 Camaro power steering pump & pulley (ICT # PUM200 & ICT #PUL200) 
  • Alternator: (ICT# ALT300)(will not fit Corvette/CTSV/G8 or 2010 up Camaro large bolt pattern alternators), will fit any other LS powered vehicle alternators with any amperage.  145+ alternators do not have the provision for the rear bracket.
  • Made in Wichita, Kansas from aerospace grade, USA produced, billet aluminum
  • Includes: alternator bracket, power steering bracket, smooth pulley, and mounting hardware
  • **Compatible with: all GM LS series engines
  • If needing to extend your alternator harness connection, use ICT# WEALT30-36 (4-pin) or WEALT40-36 (2-pin)
 
  **On "truck" engine blocks with only 1 mounting hole in the block, you will be required to drill a second mounting hole using drill template 551445
 
 Compatible with: 955K6 (95.5 inch) belt with 105 amp alternator and ICT Billet 551472-3 Sanden 7176 A/C kit
                987K6 (98.7 inch) belt with 105 amp alternator and ICT Billet 551474-3 Sanden 508 A/C kit
                895K6 (89.5 inch) belt with 105 amp alternator and ICT Billet 551495-3 R4 A/C kit
                980K6 (98.0 inch) belt with 105 amp alternator and ICT Billet 551585X-3 R4 A/C kit                
                790K6 (79.0 inch) belt with 105 amp alternator and factory belt tensioner
 

Privacy Policy | Terms of Service | Contact Us