LS Intake Air Temperature Sensor IAT 3/8"npt Threaded Turbo LS1

$30.99
In stock
SKU
SEN039
GM Delphi - LS Intake Air Temperature Sensor IAT Turbo Threaded LS1 LS3 3/8 NPT

WARNING - This product can expose you to chemicals including lead, which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.P65Warnings.ca.gov

 

ALUMINUM: Most of the aluminum alloys used today contain some level of lead, usually less than .1%. Lead is known to the state of California to cause cancer and reproductive harm. Most aluminum alloys are physiologically inert in their solid form, and the lead is contained within, however user-generated dust and/or fumes may pose a hazard if inhaled or ingested. Heating beyond a certain temperature may also provide avenues for exposure.

 

STEEL (steel bolts):  Steel is an iron alloy with several metals including Nickel and Chromium. Both Nickel and Chromium are known to the State of California to cause cancer and reproductive harm, respectfully. This warning applies to stainless steels as well.

Genuine Delphi - Intake Air Temperature Sensor

 

  • Works with any LS IAT sensor 2 wire connector
  • If you have the 5 wire MAF/IAT plug ICT# WPMAF30, you will need to remove 2 wires for a new IAT connector.  Use with ICT Billet wire pigtail part# WPIAT30
  • Includes: 1 intake temp sensor (3/8 NPT thread)
 
 
 
************** 5 wire MAF sensor rewire how to.  Use the tan and solid black wires to run the IAT senor.  These are located on the PCM RED connector pin 25 for the Tan wire, then pin 57 for the black wire. (see photo for connector wiring)
 
 

Privacy Policy | Terms of Service | Contact Us