Related products
LS 36" Alternator Adapter Harness - 4 Pin 105A Vehicle to 2 Pin Alternator 160A
$36.99
In stock
SKU
WAALT30-36
LS 36" 4-Flat Harness to 2-Pin Alternator - Wire Adapter Harness
compatible with 105 amp GM vehicle for 160 amp alternator conversion
- Assembled in Wichita, Kansas with USA made OEM grade TXL wire
- Includes: 1pc 36" wire adapter harness
- Assembled with OEM tooling, OEM (connector, lock, seals, and terminals),(uses OEM harness wire colors) and has that OEM audible "click" when the connector is attached to the harness, just like factory
- Don't take a chance with cheap wire connectors, that use poor quality (wire, crimps, twisted/bent/unseated terminals) and have conductivity issues that will cause your engine to run poorly and be difficult to diagnose. Always use genuine ICT Billet products for reliability.
- If needing shorter adapter harness, see part number WAALT30-6
More Information
| Bullet Point 1 | Compatible with 105 amp GM vehicle when converting to 160 amp alternator |
|---|---|
| Bullet Point 2 | Genuine ICT Billet swap parts. Assembled in Wichita, Kansas |
| Bullet Point 3 | Assembled with OEM tooling, OEM Delphi (connector, lock, seals, and terminals),(uses OEM harness wire colors) |
| Bullet Point 4 | Includes: 1pc wire adapter harness |
| Bullet Point 5 | Don't take a chance with cheap wire connectors, that use poor quality (wire, crimps, twisted/bent/unseated terminals) and have conductivity issues that will cause your engine to run poorly and be difficult to diagnose. Always use genuine ICT Billet produ |
| Manufacturer Part Number | WAALT30-36 |
| UPC | 840117201422 |
| Weight | 0.146000 |
| ICT Manufacturer | ICT Billet |
| United States | United States |
| Length Inches | 8 |
| Width Inches | 6 |
| Height Inches | 1 |
| Download .PDF for Vehicle | No |
WARNING - This product can expose you to chemicals including nickel, which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.P65Warnings.ca.gov
ALUMINUM: Most of the aluminum alloys used today contain some level of lead, usually less than .1%. Lead is known to the state of California to cause cancer and reproductive harm. Most aluminum alloys are physiologically inert in their solid form, and the lead is contained within, however user-generated dust and/or fumes may pose a hazard if inhaled or ingested. Heating beyond a certain temperature may also provide avenues for exposure.
STEEL (steel bolts): Steel is an iron alloy with several metals including Nickel and Chromium. Both Nickel and Chromium are known to the State of California to cause cancer and reproductive harm, respectfully. This warning applies to stainless steels as well.
