*excludes Alaska, Hawaii & Puerto Rico

ISR Performance Canton Racing oil pan kit for LS Swapped Nissan 350Z Z33 03-08

Out of stock

ISR Performance / Canton oil pan kit for LS Swap Mounts for Nissan 350Z Z33 03-08

Designed in partnership between ISR and Canton Racing, and features integrated baffling to help prevent oil starvation during track use.

This is the same pan used on our ICT Billet LS Swapped 350Z

Dont forget to order a plug (551413) for the oil level sensor if your not using the GM factory oil level sensor.

Whats in the box?

  • x1 ISR Performance / Canton oil pan
  • x1 oil pick up tube with O-ring 
  • x1 oil dip stick.


The ISR Performance / Canton oil pan kit for LS Swaps are built to fits lower and further back then other aftermarket kits currently available and are designed to fit the ISR Mount kit or if you intend to make your own custom mounts 

Certain GM mounting hardware is not able to be used with this pan when mounting to LS applications, please check hardware to ensure it is the proper length before torquing, or purchase an aftermarket stud kit to avoid any possible issues. 

Depending upon which OEM windage tray you are using, you may need to trim the windage tray to properly mount the custom oil pick up tube provided in this kit.

Legal only for use in competition vehicles which may never be registered, licensed, and/or used on public streets or highways; and also for use in other exempted vehicles.

More Information

Bullet Point 1 Made by Canton Racing Products specifically for the 350Z LS swap
Bullet Point 2 Direct fit in Z33 chassis Compatible with ISR LS swap mounts
Bullet Point 3 Can be used with auto or manual transmission
Bullet Point 4 Multiple dip stick locations
Manufacturer Part Number ISR-350LS-OILP-Kit
UPC 813638024184
Weight 15.000000
ICT Manufacturer ISR Performance
United States China
Length Inches 24
Width Inches 15
Height Inches 9
Download .PDF for Vehicle No

WARNING - This product can expose you to chemicals including nickel, which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information go to


ALUMINUM: Most of the aluminum alloys used today contain some level of lead, usually less than .1%. Lead is known to the state of California to cause cancer and reproductive harm. Most aluminum alloys are physiologically inert in their solid form, and the lead is contained within, however user-generated dust and/or fumes may pose a hazard if inhaled or ingested. Heating beyond a certain temperature may also provide avenues for exposure.


STEEL (steel bolts):  Steel is an iron alloy with several metals including Nickel and Chromium. Both Nickel and Chromium are known to the State of California to cause cancer and reproductive harm, respectfully. This warning applies to stainless steels as well.