5.3L LS Turbo Alternator & Power Steering Pump Mount Bracket LSX uses LS1or LS3 WP

$189.99
In stock
SKU
551565-3
5.3L LS Turbo Alternator & Power Steering Pump Mount Bracket LSX uses LS1or LS3 WP

Browse LS Swap Brackets.

WARNING - This product can expose you to chemicals including lead, which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.P65Warnings.ca.gov

 

ALUMINUM: Most of the aluminum alloys used today contain some level of lead, usually less than .1%. Lead is known to the state of California to cause cancer and reproductive harm. Most aluminum alloys are physiologically inert in their solid form, and the lead is contained within, however user-generated dust and/or fumes may pose a hazard if inhaled or ingested. Heating beyond a certain temperature may also provide avenues for exposure.

 

STEEL (steel bolts):  Steel is an iron alloy with several metals including Nickel and Chromium. Both Nickel and Chromium are known to the State of California to cause cancer and reproductive harm, respectfully. This warning applies to stainless steels as well.

***NOTE - NOT COMPATIBLE*** with ICT Billet timing covers with turbo oil drains, this kit will not clear the drivers side fitting.  Use the part numbers 551799-3 

 

Alternator / Power Steering / Belt Tensioner Bracket Set                   

 
 
Compatible with:  Camaro LS1 98-02 Power Steering Pump & Pulley (63105 & 12559885)
                 Camaro LS1(or LS3) 98-02 Water Pump (252-846)
                 Truck/SUV (any year or 2010-15 Camaro) Crank Pulley (12634105)
                 Truck/SUV (any year)(105 amp only) Alternator (19244779)(will NOT fit Corvette /CTSV/G8/2010up                                                                           Camaro bolt pattern alternators.  Will fit any other LS powered vehicle alternators.) 
                 Truck/SUV (any year, OEM style) Belt Tensioner (12609719)
 
                  
    
  • Compatible with all GM LS series engines
  • Includes: accessory bracket kits, belt tensioner relocation w/ pulley, water pump spacer kit w/ gaskets, and mounting hardware
  • Made in Wichita, Kansas from aerospace grade, USA produced, billet aluminum
  • This kit uses USA made (pulley, flange bolts, spacers, & brackets)
  • Will work with factory low mount A/C compressors
  • If needing to extend your alternator harness connection, use ICT# WEALT30-36 (4-pin) or WEALT40-36 (2-pin)
 




 551565-3 kit compatible with a 660K6 (66.0" length) belt
 
 



Privacy Policy | Terms of Service